Thursday, November 3, 2011

Valuable Tips For Making Or Finding the Right Go Kart Frame


If you want to know how to build a go kart frame there are many high quality go kart frame plans available to choose from. A go kart frame is the foundation for your entire go kart and must be made correctly for optimum enjoyment. You have several choices that will allow you to determine how much or how little work you will have to put in before racing around in your new go cart.

You can choose to weld or not weld, it's your decision

Welding or not welding, that is the question. If you want to weld your own you have two options. You can either make and weld your own frame from scratch or buy a go kart frame kit that has not been welded yet, which will also include a set of go kart frame plans.

If you choose to do your own welding you will either need a MIG welder or at least have access to one. If you don't have a MIG welder at your disposal you can buy a go cart frame kit with the welding already done. Buying a welded frame kit also has the advantage of having a steering hoop attached. This is one of the most difficult parts of making your own kart, so having the steering hoop already attached will eliminate some possible frustrations.

Welded go kart frames can be found cheaply online, you just need to do a little searching. Make sure you purchase a kit that includes all necessary parts for a complete frame or go cart. You don't want to be shopping for miscellaneous parts throughout the building process as it can take all the fun out of the project.

Starting with a high quality go kart frame kit

Starting with a good kit is the best approach if you are building your first go kart. Once you have a little experience under your belt you may want to try building one from scratch. If you will be driving your go cart on flat surfaces it will be easier and cheaper to build. Off road go karts require a roll cage attached to the frame and are therefore more difficult and expensive to build or buy.

If you are planning on doing your own welding you should have a large flat surface to work on. You can use a concrete floor, but a large work bench has two advantages. A work bench will allow you to work at a higher level and makes it possible to clamp things down.

Put everything in its proper place

When welding your own go kart frame the first thing you want to do is carefully measure the exact center of the front axle. Next, lay out the frame components in their proper position on the work bench. Once everything is in place begin by tack welding it all together, starting at the front axle and working your way to the rear bumper. Make sure the joints are welded strong enough so they won't come apart when moving the frame around.

A quick inspection and final welding - then it's off to the races

After tack welding is completed make a thorough inspection of the frame alignment. Everything must be correctly aligned and the frame should appear square. If you have followed the go kart frame plans that came with the kit you should be OK.

Your next step is to perform your final welding duties. Clamp the frame to the work table, making sure it is straight, square, and aligned properly. This will keep the frame from warping. Follow the instructions that came with the kit and weld all of the joints. After welding is completed it's a simple matter of finishing the kit according to the plans that were included.




Visit Joshua's website for useful tips on how to build a go kart frame, how to find the best go kart frame plans, and other essential go kart frame information.




No comments:

Post a Comment